一种是将模具运往施工场地,安放好之后在进行浇筑,被称为现浇,现浇工艺比较适合一些特殊的场合使用,比如检查井经常进行现浇生产；
The other is prefabrication.
另一种就是预制工艺。
The
prefabrication process is more convenient to use, and you only need to
choose a nearby factory with prefabrication technology to carry out
production operations.
预制工艺使用比较的方便,只需要选择近处有着预制技术的工厂就可以进行生产操作了。
The precast process is very fast to produce isolation piers.
预制工艺生产隔离墩非常的快速。
The
isolation pier mold is assembled using screws in order, and then the
mold can be simply cleaned and brushed with release agent, if there is
no release agent brush on a layer of oil is also OK, and then the cement
or concrete is slowly poured into it, using an iron rod gently agitate,
the mud is mixed more evenly.
将隔离墩模具使用螺丝按照顺序进行组装,然后将模具简单的清理就可以刷上脱模剂了,如果没有脱模剂刷上一层油也是可以的,然后将水泥或者是混凝土慢慢的倒进去,使用铁棍轻轻的搅动一下,将泥浆搅拌的更加均匀。
Then
the hand-held vibrator is inserted into the mud and stirred
continuously to allow the bubbles in the mud to be smoothly discharged.
然后用手持式的振动棒插进泥浆中不停的进行搅动,让泥浆里面的气泡顺利的排出去。
The
isolation pier is made more smooth and delicate, and it vibrates until
the cement and concrete inside the isolation pier mold are no longer
sunk, and it is OK to keep it at a height.
制作的隔离墩更加的平滑细腻,一直振动到隔离墩模具里面的水泥和混凝土不在下陷,保持在一个高度就可以了。
Then let the mold to fully dry the air can be demoulded, removable isolation pier mold reduces t
